QUOTE

Quote Request Form


Please fill out the form below, and we’ll be happy to help you with your stamping press requirements. For immediate assistance, please call 931-393-5050.

Press Information

Options & Peripheral Equipment


Powered by ChronoForms - ChronoEngine.com

SERVICE

Service Inquiries Form


Please fill out this form for technical support or service. Someone will be in touch within 24 hours. If you don’t receive a response within 24 hours, feel free to call our office at 931-393-5050 as a technical issue might have caused us not to receive the form. After hours, call 931-581-7506.

Powered by ChronoForms - ChronoEngine.com

CONTACT

General Inquiries Form


If you need service assistance, click this link to contact our support staff. Otherwise, please fill out the form below and someone will be in touch within 24 hours.

If you don’t receive a response within 24 hours, feel free to call our office at 931-393-5050 as a technical issue might have caused us not to receive the form. After hours, call 931-703-9191.


Powered by ChronoForms - ChronoEngine.com

 


STAMTEC, INC.

Your source for industry-leading presses that deliver the quality, reliability & proven performance you need

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Servo Press Tooling Seminar


SEPTEMBER 18, 2019.

Are you wondering how servo press technology can specifically benefit your press productivity, improve parts quality, and boost your profitability?

Find out for yourself at the Stamtec Servo Press Technology Center and Die Try-Out Facility.


*  4-Hour Seminar PRESENTED BY ART HEDRICK, renowned stamping industry die expert, and owner of Dieology.

* Tool and Die Shops ON-SITE for consultation.

* Several Servo Presses under power.

* Free of charge, and by invitation to Metal Stampers and Tool & Die Makers only.


EVENT TIME:  8:00am - 2:00pm

SEMINAR TOPICS:

  • What is a servo drive press in comparison to a traditional mechanical press?
  • How can a servo press make better parts, considering:
  1. Sheet Metal Basics - tensile, yield, elongation, N value, R values, strain rate sensitivity, strain distribution.
  2. Drawing Verses Stretching - drawing ratios, radii, spring-back control.
  3. Metal Cutting - burr control, reducing snap thru tonnage, clearance selection, slug control, fine blanking.
  4. Friction Control and Lubrication Behavior 

PARTNER TOOL AND DIE SHOP CONSULTANTS ON SITE:

  • Bennett Tool & Die - Nashville, TN
  • A-G Tool & Die - Cincinnati, OH
  • Greenville Tool & Die Company - Greenville, MI

STAMTEC EQUIPMENT ON-SITE:

  • Straight Side Servo Press - 660 tons will be under power during the event.
  • C-Frame Servo Presses - 121 to 220 tons
  • Traditional Mechanical Presses - 35 to 660 tons
  • Several Press Feedlines
  • Approximately 40 Machines IN-STOCK

RSVP today at 931-393-5050 or send us an This email address is being protected from spambots. You need JavaScript enabled to view it. to attend the FREE Stamtec Servo Press Tooling Seminar, September 18, 2019 in Manchester, TN.


About Stamtec

Based in Manchester, TN, Stamtec, Inc., has provided dependable, affordably priced metal stamping presses for more than 30 years in North America and almost 70 years worldwide through its parent company. Stamtec’s 72,000-square-foot sales, service, and assembly facility in Tennessee houses North America’s largest inventory of new presses and spare parts, as well as the company’s renowned engineering, sales, service and support staff. Visit stamtec.com to learn more.