IS1 Series Servo Driven Press

Stamtec iS1 Series - One-Point, Direct Drive, Gap Frame Servo Press
(Powered by Siemens)

With Stamtec’s Servo Motor Drive Technology, the standard electric motor, flywheel, and clutch/brake are replaced with a high-torque, low-rpm servo motor. Proprietary servo press controls specifically designed for the servo press to achieve a wide variety of stroke lengths and slide movement profiles, while supplying full working energy capacity even at low speeds. This allows the user to perform a wide variety of jobs in one press (e.g. drawing, re-strike, warm forming, etc.) and easily adapt to automation and feed applications. In addition, user-defined motion curves allow up to 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters.

TONNAGE RANGE: 88 - 330
Delivery Time: some models in stock or with quick delivery

Review the specs below and then contact us for more information on our iS1 Series metal stamping presses.

Specs

iS1-80

MODEL iS1-80 SPECIFICATIONS
Type		D	C
Capacity	US Tons	88	88
		Metric Tons	80	80
Rated tonnage point	in.	0.2	0.2
		mm	5	5
Stroke length	in.	7.09	7.09
		mm	180	180
Speed	SPM	~ 80	~ 80
Die height	in.	13.78	13.78
		mm	350	350
Slide area (L-R X F-B)	in.	27.56 x 18.11	27.56 x 18.11
		mm	700 x 460	700 x 460
Bolster area (L-R X F-B)	in.	35.43 x 23.62	46.06 x 23.62
		mm	900 x 600	1170 x 600
Bolster thickness	in.	3.94	3.94
		mm	100	100
Side frame opening (window) (F-B x H)	in.	25.59 x 18.11	--
		mm	650 x 460	--
Maximum die weight	lbs.	760.60	760.60
		Kgs	345	345
Slide adjustment	in.	3.15	3.15
		mm	80	80
Slide adjusting motor	Kw x p	0.4 x 4	0.4 x 4
Working height	in.	32.68	32.68
		mm	830	830
Air pressure required	PSI	70	70
		kg / cm2	5	5
Parallelism: Slide to Bolster - .001" per foot or less.  Standard voltage is 480. Other voltage available at additional cost.
Standard Paint Color- RAL-7035, Light Grey

iS1-110

iS1-160

iS1-200

iS1-260

iS1-330

Press Advantages

Standard Features

Optional Features

Diversied Curves

Please contact Stamtec concerning components and standard and optional features of our iS1 Series servo driven press.