Introducing the Stamtec SDS2-1100-177-70 Servo Press. This impressive 1,100-ton, straight-side, 2-point, eccentric-gear drive servo press features a bed size of 177 x 70 in., non-proprietary servo motors and controls, and is currently IN-STOCK and under power for inspection. Please watch the video and review the full press specifications below. If you have any questions, please feel free to contact Stamtec at 931-393-5050 for more information.
| Capacity: | 1,100 US Tons |
|---|---|
| Tonnage Rating Point: | .52 in. |
| Stroke Length (max.): | 17.72 in. (5-26 SPM) |
| Pendulum Stroke (@ 32 SPM): | 7.87 |
| Pendulum Stroke (@ 36 SPM): | 5.90 |
| Pendulum Stroke (@ 46 SPM): | 3.39 |
| Die Height, Bolster to Slide (SDAU): | 27.56 in. |
| Slide Adjustment (Powered): | 9.85 in. |
| Slide Area (L-R x F-B): | 177 x 70 in. |
| Bolster Area (L-R x F-B): | 177 x 70 in. |
| Working Height (Pit Required): | 29.53 in. |
| Opening Through Side Frame (Window) | 49.2 x 25.60 in. |
| Counter-Balance Capacity: | 33,000 lbs. |
| Main Motor: | Delta Servo Motor 275 x 2 |
| Parallelism: | Slide to Bolster - .001 in. per foot or less |
| Deflection: | .0015 in. per foot or less R to L & F to B with 2/3 of the bed area symmetrically loaded. |
STAMTEC IN 60 SECONDS: 