QUOTE

Quote Request Form


Please fill out the form below, and we’ll be happy to help you with your stamping press requirements. For immediate assistance, please call 931-393-5050.

Press Information

Options & Peripheral Equipment


Powered by ChronoForms - ChronoEngine.com

SERVICE

Service Inquiries Form


Please fill out this form for technical support or service. Someone will be in touch within 24 hours. If you don’t receive a response within 24 hours, feel free to call our office at 931-393-5050 as a technical issue might have caused us not to receive the form. After hours, call 931-581-7506.

Powered by ChronoForms - ChronoEngine.com

CONTACT

General Inquiries Form


If you need service assistance, click this link to contact our support staff. Otherwise, please fill out the form below and someone will be in touch within 24 hours.

If you don’t receive a response within 24 hours, feel free to call our office at 931-393-5050 as a technical issue might have caused us not to receive the form. After hours, call 931-703-9191.


Powered by ChronoForms - ChronoEngine.com

 


Auxiliary Equipment

Coil-handling and feeding systems, quick die change systems, & more to meet your specific needs

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

3-IN-1 Press Feeding Systems


Servo Feeder, Coil Straightener and Uncoiler

Stamtec's 3-IN-1 Servo Feeder, Straightener and Uncoiler is accurate, built to handle a wide range of material width and thickness, and can reduce waste. The ergonomic design of our coil feeder system provides more efficient operation and enhanced capabilities to meet your specific press room needs.

Review the features and specs of our 3-IN-1 servo feeder below and then contact us for assistance in identifying the combination coil straightener, uncoiler and feeder you need.


3-IN-1 PRESS FEEDING SYSTEM FEATURES
Compact design saves floor spaceVariable speed drive
Heavy duty constructionEngineered solutions for a variety of material types
Coil thickness to 12 mm (0.47 in.)Multiple modes for feeding material to the press
Coil weight up to 30,000 kg (66,138.68 lbs.)


3-IN-1 PRESS FEEDING SYSTEM SPECIFICATIONS
Max Coil Widthin.1.97 ~ 74.80
mm50 ~ 1900
Coil Thicknessin.0.01 ~ 0.47
mm0.3 ~ 12
Coil I.D.in.Ø 20
mmØ 508
Coil O.D.in.Ø 47.24 ~ 59.06
mmØ 1200 ~ 1500
Coil Weightlbs.2204.62 ~ 66138.68
kg1000 ~ 30000
Mandrel ExpansionManual and Hydraulic
Mandrel BrakeAir Disc Brake
Uncoiler Drive TypeAC Motor
Pinch Roller2 pcs
Straightening RollUpper 3 ~ 5 | Lower 3 ~ 5
Feed Roll2 pcs
Feeder Drive TypeAC Servo Motor
Feed Speed16 ~ 20
Air PressurePSI71.12
kg / cm25
Air Pilot ReleaseIncluded
Loop ControlPhoto Sensor
Machine Weightlbs.2204.62 ~ 32848.88
kg1000 ~ 14900