Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

ST1 Series Straight Side Single Crank Precision Presses

The Stamtec Straight Side Single Crank Precision Press could be widely used in the diversified production process, including metal drawing, bending, marking, flattening, and trimming. Furthermore, it could also apply single or continuous stamping mode. The ST1 is also equipped with a high-performance wet clutch, which is also green energy and high-value product with environmental protection, efficiency, high torque, and low wear.

Review the specs, features, and advantages below, and then contact us for the customized single crank press your demanding applications require.

Download Catalog

Request a Quote

Specs

ST1 80


MODEL ST1-80 SPECIFICATIONS
Type					S	H	L
Capacity			Ton	88.19
Rated Tonnage Point			in.	0.20	0.13	0.20
Stroke Length		Stroke Length	in.	3.94	2.36	5.91
Strokes Per Minute	Fixed Speed	S.P.M.	80	100	60
Strokes Per Minute		Variable Speed	S.P.M.	50-110	65-140	40-75
Die Height (S.D.A.U.)			in.	13.98	14.76	12.99
Slide Area (L.R. x F.B.)			in.	22.05 x 18.11
Bolster Area (L.R. x F.B.)	A Type	in.	30.71 x 23.62
Bolster Area (L.R. x F.B.)		B Type	in.	39.37 x 23.62			65-140	40-75
Bolster Thickness			in.	3.94
Slide Opening (L.R. x H)			in.	25.59 x 18.11
Slide Adjustment			in.	3.15
Maximum Upper Die Weight			lbs.	760.60
Main Motor			HpxP	10 x 4
Slide Adjusting Motor			kWxP	0.4 x 4
Working Height			in.	32.68
Die Cushion					D3-300-70
Capacity			Ton	6.95
Stroke			in.	2.76
Pad Area (L.R. x F.B.)			in.	16.14 x 10.24

ST1-110


MODEL ST1-110 SPECIFICATIONS
Type					S	H	L
Capacity			Ton	121.25
Rated Tonnage Point			in.	0.20	0.13	0.20
Stroke Length		Stroke Length	in.	4.33	2.76	7.09
Strokes Per Minute	Fixed Speed	S.P.M.	70	90	50
Strokes Per Minute		Variable Speed	S.P.M.	45-90	60-130	30-65
Die Height (S.D.A.U.)			in.	15.16	15.95	13.78
Slide Area (L.R. x F.B.)			in.	25.59 x 20.47
Bolster Area (L.R. x F.B.)	A Type	in.	35.43 x 26.77
Bolster Area (L.R. x F.B.)		B Type	in.	45.28 x 26.77			65-140	40-75
Bolster Thickness			in.	3.94
Slide Opening (L.R. x H)			in.	29.53 x 19.69
Slide Adjustment			in.	3.54
Maximum Upper Die Weight			lbs.	992.08
Main Motor			HpxP	15 x 4
Slide Adjusting Motor			kWxP	0.4 x 4
Working Height			in.	33.27
Die Cushion					D4-350-80
Capacity			Ton	8.82
Stroke			in.	3.15
Pad Area (L.R. x F.B.)			in.	19.69 x 11.81

ST1-160


MODEL ST1-160 SPECIFICATIONS
Type					S	H	L
Capacity			Ton	176.37
Rated Tonnage Point			in.	0.24	0.16	0.24
Stroke Length		Stroke Length	in.	5.12	3.15	7.87
Strokes Per Minute	Fixed Speed	S.P.M.	60	80	45
Strokes Per Minute		Variable Speed	S.P.M.	30-70	50-100	20-50
Die Height (S.D.A.U.)			in.	17.13	18.11	15.75
Slide Area (L.R. x F.B.)			in.	27.56 x 22.84
Bolster Area (L.R. x F.B.)	A Type	in.	39.37 x 29.92
Bolster Area (L.R. x F.B.)		B Type	in.	49.21 x 29.92			65-140	40-75
Bolster Thickness			in.	5.91
Slide Opening (L.R. x H)			in.	31.50 x 22.05
Slide Adjustment			in.	3.94
Maximum Upper Die Weight			lbs.	1190.50
Main Motor			HpxP	20 x 4
Slide Adjusting Motor			kWxP	0.75 x 4
Working Height			in.	36.02
Die Cushion					D5-400-80
Capacity			Ton	11.02
Stroke			in.	3.15
Pad Area (L.R. x F.B.)			in.	21.26 x 13.78

ST1-200


MODEL ST1-200 SPECIFICATIONS
Type					S	H	L
Capacity			Ton	220.46
Rated Tonnage Point			in.	0.24	0.16	0.24
Stroke Length		Stroke Length	in.	5.91	3.94	7.87
Strokes Per Minute	Fixed Speed	S.P.M.	50	65	35
Strokes Per Minute		Variable Speed	S.P.M.	35-70	45-95	20-50
Die Height (S.D.A.U.)			in.	18.70	19.69	17.72
Slide Area (L.R. x F.B.)			in.	33.47 x 25.59
Bolster Area (L.R. x F.B.)	A Type	in.	45.28 x 32.28
Bolster Area (L.R. x F.B.)		B Type	in.	55.12 x 32.28			65-140	40-75
Bolster Thickness			in.	6.30
Slide Opening (L.R. x H)			in.	35.43 x 24.02
Slide Adjustment			in.	4.33
Maximum Upper Die Weight			lbs.	1763.70
Main Motor			HpxP	20 x 4
Slide Adjusting Motor			kWxP	0.75 x 4
Working Height			in.	40.16
Die Cushion					D6-400-100
Capacity			Ton	15.43
Stroke			in.	3.94
Pad Area (L.R. x F.B.)			in.	25.20 x 18.50

ST1-260


MODEL ST1-260 SPECIFICATIONS
Type					S	H	L
Capacity			Ton	286.60
Rated Tonnage Point			in.	0.24	0.16	0.24
Stroke Length		Stroke Length	in.	7.09	3.94	9.84
Strokes Per Minute	Fixed Speed	S.P.M.	45	55	30
Strokes Per Minute		Variable Speed	S.P.M.	30-60	35-75	20-40
Die Height (S.D.A.U.)			in.	19.10	20.67	17.72
Slide Area (L.R. x F.B.)			in.	36.22 x 27.56
Bolster Area (L.R. x F.B.)	A Type	in.	51.18 x 33.07
Bolster Area (L.R. x F.B.)		B Type	in.	61.02 x 33.07			65-140	40-75
Bolster Thickness			in.	7.09
Slide Opening (L.R. x H)			in.	37.40 x 25.98
Slide Adjustment			in.	4.72
Maximum Upper Die Weight			lbs.	1763.70
Main Motor			HpxP	25 x 4
Slide Adjusting Motor			kWxP	1.5 x 4
Working Height			in.	44.10
Die Cushion					D7-550-100
Capacity			Ton	15.43
Stroke			in.	3.94
Pad Area (L.R. x F.B.)			in.	27.56 x 20.47

ST1-300


MODEL ST1-300 SPECIFICATIONS
Type					S	XL
Capacity			Ton	330.69
Rated Tonnage Point			in.	0.24	0.24
Stroke Length		Stroke Length	in.	7.09	11.81
Strokes Per Minute	Fixed Speed	S.P.M.	45	30
Strokes Per Minute		Variable Speed	S.P.M.	30-50	20-35
Die Height (S.D.A.U.)			in.	24.02	21.65
Slide Area (L.R. x F.B.)			in.	36.22 x 27.56
Bolster Area (L.R. x F.B.)	A Type	in.	51.18 x 33.07
Bolster Area (L.R. x F.B.)		B Type	in.	61.02 x 33.07
Bolster Thickness			in.	7.87
Slide Opening (L.R. x H)			in.	37.40 x 25.98
Slide Adjustment			in.	4.72
Maximum Upper Die Weight			lbs.	1763.70
Main Motor			HpxP	30 x 4
Slide Adjusting Motor			kWxP	1.5 x 4
Working Height			in.	44.10
Die Cushion					D7-550-100
Capacity			Ton	15.43
Stroke			in.	3.94
Pad Area (L.R. x F.B.)			in.	27.56 x 20.47

Press Advantages

SINGLE CRANK Straight Side Presses (ST1 Series)

High Precision Stamping Solution
Reduced Noise & Vibration
Reduced Angular Deflection
Minimal Frame Deflection
Resistant To Off-Center Loading
Versatile Design for Various Applications
High Torque Wet Clutch & Brake
Box Type 6-point Gibs
Ultra Rigid Steel Frame
Minimum Total Clearance
User-Friendly Operator Controls

Standard Features

SINGLE CRANK Straight Side Presses (ST1 Series)

Portable 2-Hand Pushbutton T-Stand
Link 5100 MPC Press Control
Operation Mode Selection - (Off / Inch / Timed Inch / Single Stroke / Continuous)
Hydraulic Overload Protector (H.O.L.P.)
Overrun Detector
Door Interlocking Power Isolation Switch
Die Block Interlocked with Safety Circuit
Flywheel Brake
Dual-coiled Solenoid Valve
Motorized Slide Adjustment
Main Motor Reversing Circuit
Die Height Indicator (Unit: 0.1mm)
Motorized Grease Lubrication
Programmable Air Ejector, 3/8”
Air Source Receptacle, 3/8”
OmniLink 5100-MPC Press Controls

Please contact Stamtec for more details on our mechanical stamping machine components.

1-Point Straight Side
Photo Gallery

VIEW

Quote Request Form

Press Information

Options & Peripheral Equipment

Service Inquiries Form

General Inquiries Form

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

ST1 Series Straight Side Single Crank Precision Presses

Specs

ST1 80

ST1-110

ST1-160

ST1-200

ST1-260

ST1-300

Press Advantages

SINGLE CRANK Straight Side Presses (ST1 Series)

Standard Features

SINGLE CRANK Straight Side Presses (ST1 Series)

Optional Features

SINGLE CRANK Straight Side Presses (ST1 Series)