Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

PRESSA FRONTALE SERIE SC1

La pressa a montanti Stamtec SC1 (nota anche pressa a manovella) è concepita per lo stampaggio di pezzi di piccole dimensioni a elevate velocità su corsa singola o in modalità continua, utilizzando materiale in pezzi pretranciati o in bobina. Proposta a un prezzo accessibile quando confrontata con una pressa frontale, la SC1 presenta caratteristiche di deflessione angolare simili. La costruzione della SC1 consente anche un facile adattamento dell’apparecchiatura di automazione.

TONNELLAGGI: 88 - 276
TEMPI DI CONSEGNA: 20-22 settimane

Le presse Stamtec possono essere personalizzate per soddisfare un’ampia gamma di specifiche e dimensioni: corse al minuto (SPM), corsa, distanza nominale dal punto morto inferiore (PMI), basamento e altro ancora.

SCARICA IL CATALOGO

RICHIEDI UN PREVENTIVO

Specs

SC1 80


MODEL SC1-80 SPECIFICATIONS
Type		S	H	L
Capacity	US Tons	88	88	88
Capacity		Metric Tons	80	80	80
Rated tonnage point	in.	0.2	0.13	0.2
Rated tonnage point		mm	5	3.2	5
Stroke length	in.	3.94	2.36	6.3
Stroke length		mm	100	60	160
Strokes per minute	Variable	-	-	60
Strokes per minute		Fixed	55 ~ 110	75 ~ 150	40 ~ 75
Die height	in.	11.81	11.81	12.99
Die height		mm	300	300	330
Maximum upper die weight	lbs.	881.85	881.85	881.85
Maximum upper die weight		Kgs	400	400	400
Slide adjustment	in.	3.15	3.15	3.15
Slide adjustment		mm	80	80	80
Bolster area (L-R x F-B)	in.	29.53 x 18.11	29.53 x 18.11	29.53 x 23.62
Bolster area (L-R x F-B)		mm	750 x 460	750 x 460	750 x 600
Slide area (L-R x F-B)	in.	22.05 x 18.11	22.05 x 18.11	22.05 x 18.11
Slide area (L-R x F-B)		mm	560 x 460	560 x 460	560 x 460
Slide opening (F-B x H)	in.	20.08 x 16.93	20.08 x 16.93	25.59 x 18.11
Slide opening (F-B x H)		mm	510 x 430	510 x 430	650 x 460
Scrap area (L-R x H)	in.	18.90 x 11.02	18.90 x 11.02	18.90 x 11.02
Scrap area (L-R x H)		mm	480 x 280	480 x 280	480 x 280
Main motor	Kw x p	5.5 x 4	5.5 x 4	5.5 x 4
Main motor		Hp x p	7.5 x 4	7.5 x 4	7.5 x 4
Slide adjusting motor	Kw x p	0.4 x 4	0.4 x 4	0.4 x 4
Slide adjusting motor		Hp x p	0.5 x 4	0.5 x 4	0.5 x 4

DIE CUSHION
Type		S	H	L
Capacity	US Tons	-	-	6
Capacity		Metric Tons	-	-	6.3
Pad area (LR x FB)	in.	16.14 x 10.24	16.14 x 10.24	16.14 x 10.24
Pad area (LR x FB)		mm	410 x 260	410 x 260	410 x 260
Stroke	in.	2.76	2.76	2.76
Stroke		mm	70	70	70

MACHINE DIMENSIONS
Type		S	H	L
Width (LR)	in.	48.43	48.43	48.43
Width (LR)		mm	1230	1230	1230
Depth (FB)	in.	68.11	68.11	70.87
Depth (FB)		mm	1730	1730	1800
Height (H)	in.	111.02	111.02	113.39
Height (H)		mm	2820	2820	2880

SC1 110


MODEL SC1-110 SPECIFICATIONS
Type		S	H	L
Capacity	US Tons	121	121	121
Capacity		Metric Tons	110	110	110
Rated tonnage point	in.	0.2	0.13	0.2
Rated tonnage point		mm	5	3.2	5
Stroke length	in.	4.33	2.76	7.09
Stroke length		mm	110	70	180
Strokes per minute	Variable	-	-	50
Strokes per minute		Fixed	50 ~ 100	65 ~ 135	30 ~ 65
Die height	in.	12.6	12.6	13.78
Die height		mm	320	320	350
Maximum upper die weight	lbs.	992.08	992.08	992.08
Maximum upper die weight		Kgs	450	450	450
Slide adjustment	in.	3.54	3.54	3.54
Slide adjustment		mm	90	90	90
Bolster area (L-R x F-B)	in.	35.43 x 20.47	35.43 x 20.47	35.43 x 27.56
Bolster area (L-R x F-B)		mm	900 x 520	900 x 520	900 x 700
Slide area (L-R x F-B)	in.	25.59 x 20.47	25.59 x 20.47	25.59 x 20.47
Slide area (L-R x F-B)		mm	650 x 520	650 x 520	650 x 520
Slide opening (F-B x H)	in.	22.44 x 18.50	22.44 x 18.50	29.53 x 19.69
Slide opening (F-B x H)		mm	570 x 470	570 x 470	750 x 500
Scrap area (L-R x H)	in.	21.26 x 11.02	21.26 x 11.02	21.26 x 11.02
Scrap area (L-R x H)		mm	540 x 280	540 x 280	540 x 280
Main motor	Kw x p	7.5 x 4	7.5 x 4	7.5 x 4
Main motor		Hp x p	10 x 4	10 x 4	10 x 4
Slide adjusting motor	Kw x p	0.4 x 4	0.4 x 4	0.4 x 4
Slide adjusting motor		Hp x p	0.5 x 4	0.5 x 4	0.5 x 4

DIE CUSHION
Type		S	H	L
Capacity	US Tons	-	-	8
Capacity		Metric Tons	-	-	8
Pad area (LR x FB)	in.	19.69 x 11.81	19.69 x 11.81	19.69 x 11.81
Pad area (LR x FB)		mm	500 x 300	500 x 300	500 x 300
Stroke	in.	3.15	3.15	3.15
Stroke		mm	80	80	80

MACHINE DIMENSIONS
Type		S	H	L
Width (LR)	in.	53.74	53.74	53.74
Width (LR)		mm	1365	1365	1365
Depth (FB)	in.	76.77	76.77	80.32
Depth (FB)		mm	1950	1950	2040
Height (H)	in.	117.32	117.32	119.88
Height (H)		mm	2980	2980	3045

SC1 160


MODEL SC1-160 SPECIFICATIONS
Type		S	H	L	XL
Capacity	US Tons	176	176	176	176
Capacity		Metric Tons	160	160	160	160
Rated tonnage point	in.	0.24	0.16	0.24	0.24
Rated tonnage point		mm	6	4	6	6
Stroke length	in.	5.12	3.15	7.87	9.84
Stroke length		mm	130	80	200	250
Strokes per minute	Variable	-	-	45	45
Strokes per minute		Fixed	40 ~ 85	55 ~ 115	25 ~ 50	20 ~ 45
Die height	in.	13.78	13.78	17.72	17.72
Die height		mm	350	350	450	450
Maximum upper die weight	lbs.	1543	1543	1543	1543
Maximum upper die weight		Kgs	700	700	700	700
Slide adjustment	in.	3.94	3.94	3.94	3.94
Slide adjustment		mm	100	100	100	100
Bolster area (L-R X F-B)	in.	39.37 x 22.83	39.37 x 22.83	39.37 x 29.53	39.37 x 29.53
Bolster area (L-R X F-B)		mm	1000 x 580	1000 x 580	1000 x 750	1000 x 750
Slide area (L-R X F-B)	in.	27.56 x 22.83	27.56 x 22.83	27.56 x 22.83	27.56 x 22.83
Slide area (L-R X F-B)		mm	700 x 580	700 x 580	700 x 580	700 x 580
Side opening (F-B x H)	in.	24.80 x 20.07	24.80 x 20.07	31.50 x 22.05	31.50 x 24.02
Side opening (F-B x H)		mm	630 x 510	630 x 510	800 x 560	800 x 610
Scrap opening (F-B x H)	in.	22.84 x 11.02	22.84 x 11.02	22.84 x 11.02	22.84 x 11.02
Scrap opening (F-B x H)		mm	580 x 280	580 x 280	580 x 280	580 x 280
Main motor	Kw x p	11 x 4	11 x 4	11 x 4	11 x 4
Main motor		Hp x p	15 x 4	15 x 4	15 x 4	15 x 4
Slide adjusting motor	Kw x p	0.5 x 4	0.5 x 4	0.5 x 4	0.5 x 4
Slide adjusting motor		Hp x p	0.75 x 4	0.75 x 4	0.75 x 4	0.75 x 4

DIE CUSHION
Type		S	H	L	XL
Capacity	US Tons	-	-	11	11
Capacity		Metric Tons	-	-	10	10
Pad area (LR x FB)	in.	21.26 x 13.78	21.26 x 13.78	21.26 x 13.78	21.26 x 13.78
Pad area (LR x FB)		mm	540 x 350	540 x 350	540 x 350	540 x 350
Stroke	in.	3.15	3.15	3.15	3.15
Stroke		mm	80	80	80	80

MACHINE DIMENSIONS
Type		S	H	L	XL
Width (LR)	in.	59.06	59.06	59.06	59.06
Width (LR)		mm	1500	1500	1500	1500
Depth (FB)	in.	86.81	86.81	90.16	90.16
Depth (FB)		mm	2205	2205	2290	2290
Height (H)	in.	134.25	134.25	140.35	146.06
Height (H)		mm	3410	3410	3565	3710

SC1 200


MODEL SC1-200 SPECIFICATIONS
Type		S	H	L	XL
Capacity	US Tons	220	220	220	220
Capacity		Metric Tons	200	200	200	200
Rated tonnage point	in.	0.24	0.16	0.24	0.24
Rated tonnage point		mm	6	4	6	6
Stroke length	in.	5.91	3.74	7.87	9.85
Stroke length		mm	150	95	200	250
Strokes per minute	Variable	-	-	35	35
Strokes per minute		Fixed	35 ~ 70	45 ~ 95	20 ~ 45	20 ~ 40
Die height	in.	16.14	16.14	17.72	17.72
Die height		mm	410	410	450	450
Maximum upper die weight	lbs.	31.5	31.5	31.5	31.5
Maximum upper die weight		Kgs	800	800	800	800
Slide adjustment	in.	4.33	4.33	4.33	4.33
Slide adjustment		mm	110	110	110	110
Bolster area (L-R X F-B)	in.	45.28 x 25.59	45.28 x 25.59	45.28 x 33.47	45.28 x 33.47
Bolster area (L-R X F-B)		mm	1150 x 650	1150 x 650	1150 x 850	1150 x 850
Slide area (L-R X F-B)	in.	33.47 x 25.59	33.47 x 25.59	33.47 x 25.59	33.47 x 25.59
Slide area (L-R X F-B)		mm	850 x 650	850 x 650	850 x 650	850 x 650
Side opening (F-B x H)	in.	27.56 x 22.44	27.56 x 22.44	35.43 x 24.02	35.43 x 24.02
Side opening (F-B x H)		mm	700 x 570	700 x 570	900 x 610	900 x 610
Scrap opening (F-B x H)	in.	27.56 x 11.02	27.56 x 11.02	27.56 x 11.02	27.56 x 11.02
Scrap opening (F-B x H)		mm	700 x 280	700 x 280	700 x 280	700 x 280
Main motor	Kw x p	15 x 4	15 x 4	15 x 4	15 x 4
Main motor		Hp x p	20 x 4	20 x 4	20 x 4	20 x 4
Slide adjusting motor	Kw x p	0.75 x 4	0.75 x 4	0.75 x 4	0.75 x 4
Slide adjusting motor		Hp x p	1 x 4	1 x 4	1 x 4	1 x 4

DIE CUSHION
Type		S	H	L	XL
Capacity	US Tons	-	-	15	15
Capacity		Metric Tons	-	-	14	14
Pad area (LR x FB)	in.	25.20 x 18.50	25.20 x 18.50	25.20 x 18.50	25.20 x 18.50
Pad area (LR x FB)		mm	640 x 470	640 x 470	640 x 470	640 x 470
Stroke	in.	3.94	3.94	3.94	3.94
Stroke		mm	100	100	100	100

MACHINE DIMENSIONS
Type		S	H	L	XL
Width (LR)	in.	69.29	69.29	69.29	69.29
Width (LR)		mm	1760	1760	1760	1760
Depth (FB)	in.	98.03	98.03	101.97	101.97
Depth (FB)		mm	2490	2490	2590	2590
Height (H)	in.	149.61	149.61	152.17	157.87
Height (H)		mm	3800	3800	3865	4010

SC1 260


MODEL SC1-260 SPECIFICATIONS
Type		S	H	L	XL
Capacity	US Tons	286	286	286	286
Capacity		Metric Tons	260	260	260	260
Rated tonnage point	in.	0.26	0.16	0.26	0.26
Rated tonnage point		mm	6.5	4	6.5	6.5
Stroke length	in.	7.1	3.94	9.84	11.81
Stroke length		mm	180	100	250	300
Strokes per minute	Variable	-	-	30	30
Strokes per minute		Fixed	30 ~ 60	40 ~ 75	20 ~ 40	20 ~ 35
Die height	in.	18.11	18.11	19.69	21.26
Die height		mm	460	460	500	540
Maximum upper die weight	lbs.	1763.7	1763.7	1763.7	1763.7
Maximum upper die weight		Kgs	800	800	800	800
Slide adjustment	in.	4.72	4.72	4.72	4.72
Slide adjustment		mm	120	120	120	120
Bolster area (L-R X F-B)	in.	51.18 x 27.56	51.18 x 27.56	51.18 x 35.43	51.18 x 35.43
Bolster area (L-R X F-B)		mm	1300 x 700	1300 x 700	1300 x 900	1300 x 900
Slide area (L-R X F-B)	in.	36.22 x 27.56	36.22 x 27.56	36.22 x 27.56	36.22 x 27.56
Slide area (L-R X F-B)		mm	920 x 700	920 x 700	920 x 700	920 x 700
Side opening (F-B x H)	in.	29.53 x 24.41	29.53 x 24.41	29.53 x 24.41	29.53 x 24.41
Side opening (F-B x H)		mm	750 x 620	750 x 620	950 x 660	950 x 700
Scrap opening (F-B x H)	in.	27.95 x 11.02	27.95 x 11.02	27.95 x 11.02	27.95 x 11.02
Scrap opening (F-B x H)		mm	710 x 280	710 x 280	710 x 280	710 x 280
Main motor	Kw x p	19 x 4	19 x 4	19 x 4	19 x 4
Main motor		Hp x p	25 x 4	25 x 4	25 x 4	25 x 4
Slide adjusting motor	Kw x p	1.5 x 4	1.5 x 4	1.5 x 4	1.5 x 4
Slide adjusting motor		Hp x p	2 x 4	2 x 4	2 x 4	2 x 4

DIE CUSHION
Type		S	H	L	XL
Capacity	US Tons	-	-	15	15
Capacity		Metric Tons	-	-	14	14
Pad area (LR x FB)	in.	27.56 x 18.50	27.56 x 18.50	27.56 x 18.50	27.56 x 18.50
Pad area (LR x FB)		mm	700 x 470	700 x 470	700 x 470	700 x 470
Stroke	in.	3.94	3.94	3.94	3.94
Stroke		mm	100	100	100	100

MACHINE DIMENSIONS
Type		S	H	L	XL
Width (LR)	in.	75.2	75.2	75.2	75.2
Width (LR)		mm	1910	1910	1910	1910
Depth (FB)	in.	104.53	104.53	108.47	108.47
Depth (FB)		mm	2655	2655	2755	2755
Height (H)	in.	166.93	166.93	170.28	176.77
Height (H)		mm	4240	4240	4325	4490

SC1 300


MODEL SC1-300 SPECIFICATIONS
Type		XL
Capacity	US Tons	330
Capacity		Metric Tons	300
Rated tonnage point	in.	0.28
Rated tonnage point		mm	7
Stroke length	in.	11.81
Stroke length		mm	300
Strokes per minute	Variable	30
Strokes per minute		Fixed	20 ~ 35
Die height	in.	21.65
Die height		mm	550
Maximum upper die weight	lbs.	1984.16
Maximum upper die weight		Kgs	900
Slide adjustment	in.	4.72
Slide adjustment		mm	120
Bolster area (L-R X F-B)	in.	62.99 x 39.37
Bolster area (L-R X F-B)		mm	1600 x 1000
Slide area (L-R X F-B)	in.	55.12 x 35.43
Slide area (L-R X F-B)		mm	1400 x 900
Side opening (F-B x H)	in.	43.31 x 29.53
Side opening (F-B x H)		mm	1100 x 750
Scrap opening (F-B x H)	in.	39.37 x 16.14
Scrap opening (F-B x H)		mm	1000 x 410
Main motor	Kw x p	22.5 x 4
Main motor		Hp x p	30 x 4
Slide adjusting motor	Kw x p	2.2 x 4
Slide adjusting motor		Hp x p	3 x 4

DIE CUSHION
Type		XL
Capacity	US Tons	15
Capacity		Metric Tons	14
Pad area (LR x FB)	in.	27.56 x 18.50
Pad area (LR x FB)		mm	700 x 470
Stroke	in.	3.94
Stroke		mm	100

MACHINE DIMENSIONS
Type		XL
Width (LR)	in.	88.98
Width (LR)		mm	2260
Depth (FB)	in.	115.95
Depth (FB)		mm	2945
Height (H)	in.	178.15
Height (H)		mm	4525

Vantaggi

Vantaggi della pressa - Presse a montanti a 1 punto di spinta (Serie SC1)

SC1 - 1 point straight side press - Stamtec SC1 - Pressa a montanti a 1 punto di spinta - Stamtec

La pesante incastellatura monolitica in acciaio, dalla quale sono stati completamente eliminati gli stress termici prima della lavorazione meccanica, offre una solida base per resistere alla deflessione e assicura sia stampaggi più precisi sia durata più lunga dello stampo

Grazie alla deflessione angolare inferiore della pressa, è possibile eseguire stampaggi più precisi rispetto a una pressa frontale.

Il sistema di protezione a risposta rapida di limitazione del sovraccarico rilascia la pressione di un sovraccarico del tonnellaggio nell’arco di millisecondi, arrestando subito la pressa e prevenendo danni alla pressa e agli stampi.

Funzioni a richiesta

Funzioni a richiesta - Presse a montanti a 1 punto di spinta (Serie SC1)

Cinematismo Link-drive
Sistemi di comando della pressa realizzati da aziende di prestigio nel settore come Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, ecc.
Supporti antivibrazione di livellamento pressa
Barriere luminose di sicurezza
Monitor del tonnellaggio
Sistema di cambio rapido dello stampo
Cuscino dello stampo
Compatta linea di alimentazione servocomandata

Funzioni standard

Funzioni standard - Presse a montanti a 1 punto di spinta (Serie SC1)

Freno e frizione in bagno d’olio
Freno volano
Sistema di limitazione del sovraccarico
Sistema di contrappeso pneumatico
Sistema di lubrificazione automatica
Indicatore digitale altezza stampo
Barra di estrazione
Piastra portastampo e piastra della slitta con scanalatura a T, flangiate, amovibili
Regolazione slitta motorizzata
Funzioni del comando:
- Sei interruttori di fine corsa programmabili
- Quattro ingressi di monitoraggio dello stampo programmabili
- Contatori a sei cifre del lotto e dei pezzi
- Display a cristalli liquidi per la visualizzazione dei messaggi di stato e di errore
- Visualizzazione del numero di corse al minuto (SPM) e dell’angolo di manovella
- Sostegno di sicurezza interbloccato

Serie SC1
Galleria Fotografica

Guarda Ora

PRESSE MECCANICHE, FORGIATE E SERVO PER LA VOSTRA COMPLETA SOLUZIONE DI PRESSE IN LINEA