Providing flexibility, productivity & profitability, with a virtually unlimited number of stroke & slide movement profiles
To start investigating financing options, you can enter a budgetary dollar amount below, or call Stamtec at 931-393-5050 for pricing on the equipment model you are interested in.
Providing flexibility, productivity & profitability, with a virtually unlimited number of stroke & slide movement profiles
Stamtec iS1 Series - One-Point, Direct Drive, Gap Frame Servo Press
(Powered by Siemens)
With Stamtec’s Servo Motor Drive Technology, the standard electric motor, flywheel, and clutch/brake are replaced with a high-torque, low-rpm servo motor. Proprietary servo press controls specifically designed for the servo press to achieve a wide variety of stroke lengths and slide movement profiles, while supplying full working energy capacity even at low speeds. This allows the user to perform a wide variety of jobs in one press (e.g. drawing, re-strike, warm forming, etc.) and easily adapt to automation and feed applications. In addition, user-defined motion curves allow up to 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters.
TONNAGE RANGE: 88 - 330
Delivery Time: some models in stock or with quick delivery
Review the specs below and then contact us for more information on our iS1 Series metal stamping presses.
MODEL iS1-80 SPECIFICATIONS | |||
---|---|---|---|
Type | D | C | |
Capacity | US Tons | 88 | 88 |
Metric Tons | 80 | 80 | |
Rated tonnage point | in. | 0.2 | 0.2 |
mm | 5 | 5 | |
Stroke length | in. | 7.09 | 7.09 |
mm | 180 | 180 | |
Speed | SPM | ~ 80 | ~ 80 |
Die height | in. | 13.78 | 13.78 |
mm | 350 | 350 | |
Slide area (L-R X F-B) | in. | 27.56 x 18.11 | 27.56 x 18.11 |
mm | 700 x 460 | 700 x 460 | |
Bolster area (L-R X F-B) | in. | 35.43 x 23.62 | 46.06 x 23.62 |
mm | 900 x 600 | 1170 x 600 | |
Bolster thickness | in. | 3.94 | 3.94 |
mm | 100 | 100 | |
Side frame opening (window) (F-B x H) | in. | 25.59 x 18.11 | -- |
mm | 650 x 460 | -- | |
Maximum die weight | lbs. | 760.60 | 760.60 |
Kgs | 345 | 345 | |
Slide adjustment | in. | 3.15 | 3.15 |
mm | 80 | 80 | |
Slide adjusting motor | Kw x p | 0.4 x 4 | 0.4 x 4 |
Working height | in. | 32.68 | 32.68 |
mm | 830 | 830 | |
Air pressure required | PSI | 70 | 70 |
kg / cm2 | 5 | 5 | |
Parallelism: Slide to Bolster - .001" per foot or less. Standard voltage is 480. Other voltage available at additional cost. | |||
Standard Paint Color- RAL-7035, Light Grey |