General Inquiries Form

If you need service assistance, click this link to contact our support staff. Otherwise, please fill out the form below and someone will be in touch within 24 hours.

If you don’t receive a response within 24 hours, feel free to call our office at 931-393-5050 as a technical issue might have caused us not to receive the form. After hours, call 931-703-9191.

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

HSD Series 2-Point Straight Side Press

The Stamtec HSD series two-point straight side press (a.k.a. double point crank press) is designed for demanding, high-speed applications such as motor lamination stamping. The precision ground alloy steel crankshaft features wide connections closely supported by four bronze main bearings, allowing the HSD double crank press to handle long tools and off-center loading easily. High precision, eight-point roller bearing gibs guide the slide accurately through the entire stroke.

Every Stamtec straight side press can be customized to meet a wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions.

Review the specs, features and advantages below and then contact us for the customized double crank press your demanding applications require.

Download

Request a Quote

Specs

HSD 60


MODEL HSD-60 SPECIFICATIONS
Capacity	US Tons	66
Capacity		Metric Tons	60
Rated tonnage point	in.	0.125
Rated tonnage point		mm	3.2
Stroke length	in.	1.18
Stroke length		mm	30
Speed	SPM	200 ~ 550
Die height	in.	13.39
Die height		mm	340
Slide adjustment	in.	1.97
Slide adjustment		mm	50
Bolster area (L-R X F-B)	in.	33.47 x 23.62
Bolster area (L-R X F-B)		mm	850 x 600
Slide area (L-R X F-B)	in.	31.10 x 17.72
Slide area (L-R X F-B)		mm	790 x 450
Bed opening (L-R x F-B)	in.	27.56 x 7.87
Bed opening (L-R x F-B)		mm	700 x 200
Side frame opening (window) (F-B x H)	in.	11.81 x 11.81
Side frame opening (window) (F-B x H)		mm	300 x 300
Main motor	HP	VS 20
Air pressure required	PSI	71.12
Air pressure required		kg/cm2	5

HSD 80


MODEL HSD-80 SPECIFICATIONS
Capacity	US Tons	88
Capacity		Metric Tons	80
Rated tonnage point	in.	0.125
Rated tonnage point		mm	3.2
Stroke length	in.	1.18
Stroke length		mm	30
Speed	SPM	200 ~ 550
Die height	in.	14.17
Die height		mm	360
Slide adjustment	in.	1.97
Slide adjustment		mm	50
Bolster area (L-R X F-B)	in.	43.31 x 27.56
Bolster area (L-R X F-B)		mm	1100 x 700
Slide area (L-R X F-B)	in.	39.36 x 19.68
Slide area (L-R X F-B)		mm	1,000 x 500
Bed opening (L-R x F-B)	in.	35.43 x 7.87
Bed opening (L-R x F-B)		mm	900 x 200
Side frame opening (window) (F-B x H)	in.	13.78 x 13.78
Side frame opening (window) (F-B x H)		mm	350 x 350
Main motor	HP	VS 30
Air pressure required	PSI	71.12
Air pressure required		kg/cm2	5

HSD 125


MODEL HSD-125 SPECIFICATIONS
Capacity	US Tons	137
Capacity		Metric Tons	125
Rated tonnage point	in.	0.125
Rated tonnage point		mm	3.2
Stroke length	in.	1.18
Stroke length		mm	30
Speed	SPM	200 ~ 500
Die height	in.	14.96
Die height		mm	380
Slide adjustment	in.	1.97
Slide adjustment		mm	50
Bolster area (L-R X F-B)	in.	51.18 x 31.50
Bolster area (L-R X F-B)		mm	1300 x 800
Slide area (L-R X F-B)	in.	47.24 x 23.62
Slide area (L-R X F-B)		mm	1200 x 600
Bed opening (L-R x F-b)	in.	43.30 x 8.27
Bed opening (L-R x F-b)		mm	1100 x 210
Side frame opening (window) (F-B x H)	in.	15.75 x 15.75
Side frame opening (window) (F-B x H)		mm	400 x 400
Main motor	HP	VS 40
Air pressure required	PSI	71.12
Air pressure required		kg/cm2	5

HSD 200


MODEL HSD-200 SPECIFICATIONS
Capacity	US Tons	220
Capacity		Metric Tons	200
Rated tonnage point	in.	0.125
Rated tonnage point		mm	3.2
Stroke length	in.	1.18
Stroke length		mm	30
Speed	SPM	150 ~ 350
Die height	in.	15.74
Die height		mm	400
Slide adjustment	in.	2.36
Slide adjustment		mm	60
Bolster area (L-R X F-B)	in.	70.86 x 35.43
Bolster area (L-R X F-B)		mm	1800 x 900
Slide area (L-R X F-B)	in.	66.92 x 27.56
Slide area (L-R X F-B)		mm	1700 x 700
Bed opening (L-R x F-b)	in.	60.43 x 13.78
Bed opening (L-R x F-b)		mm	1535 x 350
Side frame opening (window) (F-B x H)	in.	17.72 x 17.72
Side frame opening (window) (F-B x H)		mm	450 x 450
Main motor	HP	VS 50
Air pressure required	PSI	71.12
Air pressure required		kg/cm2	5

HSD 300


MODEL HSD-300 SPECIFICATIONS
Capacity	US Tons	330
Capacity		Metric Tons	300
Rated tonnage point	in.	0.125
Rated tonnage point		mm	3.2
Stroke length	in.	1.18
Stroke length		mm	30
Speed	SPM	100 ~ 300
Die height	in.	16.54
Die height		mm	420
Slide adjustment	in.	2.76
Slide adjustment		mm	70
Bolster area (L-R X F-B)	in.	78.74 x 39.36
Bolster area (L-R X F-B)		mm	2000 x 1000
Slide area (L-R X F-B)	in.	78.74 x 35.43
Slide area (L-R X F-B)		mm	2000 x 900
Bed opening (L-R x F-b)	in.	59.05 x 13.78
Bed opening (L-R x F-b)		mm	1500 x 350
Side frame opening (window) (F-B x H)	in.	17.72 x 17.72
Side frame opening (window) (F-B x H)		mm	450 x 450
Main motor	HP	VS 60
Air pressure required	PSI	71.12
Air pressure required		kg/cm2	5

Press Advantages

2-Point Straight Side Presses (HSD Series)

Standard dynamic balancing device counterbalances the eccentric thrust generated from the crankshaft rotation and slide movement, ensuring reduced frame vibration, better stampings and longer die life.

Standard hydraulic slide adjustment locking device eliminates clearances in the slide adjustment mechanism, reducing the effects of snap-through and assuring consistent bottom dead-center accuracy.

HSD Plunger - Stamtec mechanical presses Plunger guides maintain the plunger and guide clearance, compensating for differences in expansion rates between crown and slide and resisting the front to back load created by crankshaft rotation.

Standard Features

Straight Side Presses (HSD Series)

Wet clutch and brake
Flywheel brake
Hydraulic overload system
Air counterbalance system
Automatic lubrication system
Digital die height indicator
Knockout bar
Removable, flanged, T-slotted slide plate and bolster
Motorized slide adjustment (on presses over 80 tons)
Press control with:
- Six programmable limit switches
- Four programmable die monitor inputs
- Six-digit part and batch counters
- LCD display screen for status and fault messages
- LED display for crank angle and spm
- Interlocked die safety block

Please contact Stamtec for more details on our mechanical stamping machine components.

2-Point Straight Side
Photo Gallery

VIEW

Quote Request Form

Press Information

Options & Peripheral Equipment

Service Inquiries Form

General Inquiries Form

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

HSD Series 2-Point Straight Side Press

Specs

HSD 60

HSD 80

HSD 125

HSD 200

HSD 300

Press Advantages

2-Point Straight Side Presses (HSD Series)

Standard Features

Straight Side Presses (HSD Series)

Optional Features

Straight Side Presses (HSD Series)