The Stamtec GTX double crank press was designed for stamping relatively long, narrow parts at high single stroking rates or in continuous mode, using either blanks or coil stock; or running progressive dies that need the longer bed area to accommodate long dies with multiple stations. The GTX offers an extra wide, centered 6-pt, full length box gib type.
The GTX provides a large die area at a very economical price, while still providing the rigidity and low deflection characteristics of a traditional straight side press.
Tonnage Range: 176-550 Delivery Time: 18-22 weeks
Stamtec presses can customized by a wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions.
The heavy, welded steel frame is fully stress relieved and designed to resist deflection and provide accurate stampings and long die life.
The Stamtec clutch delivers full torque at relatively low air pressure, resulting in longer lining life. Linings running in an enclosed oil bath dissipate heat and prolong the life of clutch and brake linings.
Box type centered gibs assure accurate slide guiding, providing full control front to back and left to right. Extras long gibs guide the slide through the entire length of the working stroke, minimizing the lateral thrust load on the slide.
1. Bolster 2. Slide plate (detachable) 3. Slide 4. Steel frame 5. Slide adjustment housing 6. Pinion shaft 7. Adjusting screw 8. Crankshaft 9. Connection 10. Counterbalance 11. Main gear 12. Flywheel 13. Wet clutch & brake 14. Safety guard bracket