|
|
Home »
Presses » 1 Point Gap Frame Presses » OCP Series
|
|
1 Point Gap Frame Press - OCP Series
|
|
|
1 Point Gap Frame Presses - (OCP Series)
The Stamtec OCP single point gap frame press (aka OBG, OBS, OBI, or c-frame) was designed for stamping small parts at high single stroking rates or in continuous mode, using either blanks or coil stock. The OCP provides all the features you expect to find in a world-class press, at a very competitive price, backed up by a 3-year warranty.
Tonnage Range: 27-286
Delivery Time: In stock, or 14-16 weeks if not in stock
Stamtec presses can customized by a wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions.
Press Advantages - 1 Point Gap Frame Presses (OCP Series)
 Stamtec’s heavy, one-piece welded steel frame is fully stress relieved and designed to resist deflection and provide accurate stampings and longer die life.
Our fast response hydraulic overload relieves the pressure of a tonnage overload in milliseconds, stopping the press immediately to help protect your press and dies from damage.
Our extra-long gibs provide excellent control of slide alignment and accuracy throughout the entire stroke.
Our slide comes equipped with a removable, steel, t-slotted die-mounting plate for easy modification, repair or replacement.
Our wet clutch/brake provides long life, very low maintenance, and high performance even at high single stroking rates.
At no additional cost, our press control comes with features which are often “optional” on “standard” press controls:
• Six (6) programmable limit switches
• Four (4) programmable die protection inputs
• LCD display screen for status and fault messages
• LED display for crank angle and spm
Standard Features - 1 Point Gap Frame Presses (OCP Series)
- Wet type clutch and brake
- Flywheel brake
- Hydraulic overload system
- Air counterbalance system
- Automatic grease lubrication system
- Digital die height indicator
- Knockout bar
- Removable, flanged, t-slotted slide plate and bolster
- Motorized slide adjustment (on presses over 35 tons)
- Press control with:
- Six (6) programmable limit switches
- Four (4) programmable die monitor inputs
- 6-digit part & batch counters
- LCD display screen for status and fault messages
- LED display for crank angle and spm
- Interlocked die safety block
Optional Features - 1 Point Gap Frame Presses (OCP Series)
- Link motion drive technology
- Press controls from industry leaders like Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, etc.
- Anti-vibration press leveling mounts
- Safety light curtains
- Tonnage monitor
- Quick die change system
- Die cushion
- Compact servo feedline
Press Components - 1 Point Gap Frame Presses (OCP Series)
 Press frame- Flywheel
- Wet clutch & brake
- Pinion drive shaft
- Main gear
- Counterbalance
- Crankshaft
- Adjusting screw
- Hydraulic overload
- Slide
- Slide knockout
- Slide plate (detachable)
- Bolster
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
27.5 |
| Stroke Length |
in |
2.76 |
1.57 |
3.94 |
| Stroke per Minute |
SPM |
74~140 |
95~180 |
55~100 |
| Tonnage Rating Point (BDC) |
in |
0.13 |
0.06 |
0.13 |
| Die Height |
in |
9.65 |
9.65 |
9.06 |
| Slide Adjustment |
in |
1.97 |
| Slide Area |
in |
11.81 x 8.66 |
| Shank Hole Dia |
in |
1.5 |
| Bolster Area |
in |
28.35 x 12.60 |
| Bolster Thickness |
in |
2.76 |
3.25 |
2.76 |
| Bolster Height |
in |
31.50 |
32.09 |
31.50 |
| Inner Dimension of frame |
in |
18.82 |
| Main Motor |
HPxP |
5 x 4 |
| Slide Adjust. Motor |
HPxP |
- |
| Foot Size |
in |
28.35 x 40.35 |
| Anchor Bolts Position |
in |
25.59 x 31.97 |
| Req'd Floor Space |
in |
35.43 x 40.35 x 73.62 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
38.5 |
| Stroke Length |
in |
3.15 |
1.77 |
4.33 |
| Stroke per Minute |
SPM |
70~135 |
90~180 |
50~95 |
| Tonnage Rating Point (BDC) |
in |
0.13 |
0.06 |
0.13 |
| Die Height |
in |
9.84 |
9.84 |
9.25 |
| Slide Adjustment |
in |
2.17 |
| Slide Area |
in |
14.96 x 12.60 |
| Shank Hole Dia |
in |
1.5 |
| Bolster Area |
in |
30.71 x 13.40 |
| Bolster Thickness |
in |
2.76 |
3.25 |
2.76 |
| Bolster Height |
in |
31.50 |
32.09 |
31.50 |
| Inner Dimension of frame |
in |
19.76 |
| Main Motor |
HPxP |
5 x 4 |
| Slide Adjust. Motor |
HPxP |
- |
| Foot Size |
in |
31.10 x 47.24 |
| Anchor Bolts Position |
in |
28.35 x 38.58 |
| Req'd Floor Space |
in |
36.61 x 47.24 x 82.68 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
49.5 |
| Stroke Length |
in |
3.15 |
1.97 |
4.72 |
| Stroke per Minute |
SPM |
65~130 |
85~175 |
50~95 |
| Tonnage Rating Point (BDC) |
in |
0.13 |
0.09 |
0.13 |
| Die Height |
in |
9.84 |
9.84 |
10.63 |
| Slide Adjustment |
in |
2.36 |
| Slide Area |
in |
16.93 x 13.78 |
| Shank Hole Dia |
in |
1.5 |
| Bolster Area |
in |
33.50 x 14.18 |
33.5 x 17.3 |
| Bolster Thickness |
in |
3.54 |
4.13 |
3.54 |
| Bolster Height |
in |
31.50 |
32.09 |
31.50 |
| Inner Dimension of frame |
in |
15.56 |
| Main Motor |
HPxP |
7 1/2 x 4 |
| Slide Adjust. Motor |
HPxP |
- |
| Foot Size |
in |
37.40 x 55.12 |
| Anchor Bolts Position |
in |
29.53 x 46.97 |
29.53 x 48.54 |
| Req'd Floor Space |
in |
37.40 x 67.91 x 93.11 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
66 |
| Stroke Length |
in |
3.54 |
2.17 |
5.51 |
| Stroke per Minute |
SPM |
60~120 |
80~165 |
40~85 |
| Tonnage Rating Point (BDC) |
in |
0.16 |
0.09 |
0.16 |
| Die Height |
in |
10.63 |
10.63 |
11.81 |
| Slide Adjustment |
in |
2.76 |
| Slide Area |
in |
19.69 x 15.75 |
| Shank Hole Dia |
in |
1.97 |
| Bolster Area |
in |
35.44 x 15.75 |
35.44 x 20.48 |
| Bolster Thickness |
in |
3.54 |
4.13 |
3.54 |
| Bolster Height |
in |
31.50 |
32.20 |
31.50 |
| Inner Dimension of frame |
in |
19.69 |
| Main Motor |
HPxP |
7 1/2 x 4 |
| Slide Adjust. Motor |
HPxP |
- |
| Foot Size |
in |
34.65 x 51.97 |
34.65 x 54.33 |
| Anchor Bolts Position |
in |
32.28 x 48.03 |
32.28 x 50.39 |
| Req'd Floor Space |
in |
40.16 x 71.46 x 101.38 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
88 |
| Stroke Length |
in |
3.94 |
2.36 |
6.30 |
| Stroke per Minute |
SPM |
55~110 |
65~135 |
30~65 |
| Tonnage Rating Point (BDC) |
in |
0.20 |
0.13 |
0.20 |
| Die Height |
in |
11.81 |
11.81 |
12.99 |
| Slide Adjustment |
in |
3.15 |
| Slide Area |
in |
20.05 x 18.11 |
| Shank Hole Dia |
in |
2 |
| Bolster Area |
in |
39.38 x 18.11 |
39.38 x 23.6 |
| Bolster Thickness |
in |
3.94 |
4.72 |
3.94 |
| Bolster Height |
in |
32.80 |
33.58 |
32.80 |
| Inner Dimension of frame |
in |
23.54 |
| Main Motor |
HPxP |
10 x 4 |
| Slide Adjust. Motor |
HPxP |
0.3 x 4 |
| Foot Size |
in |
39.37 x 57.99 |
39.37 x 60.04 |
| Anchor Bolts Position |
in |
32.28 x 52.48 |
32.28 x 54.53 |
| Req'd Floor Space |
in |
43.82 x 74.41 x 112.36 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
| Capacity |
US Tons |
121 |
| Stroke Length |
in |
4.33 |
2.76 |
7.09 |
| Stroke per Minute |
SPM |
50~100 |
65~135 |
30~65 |
| Tonnage Rating Point (BDC) |
in |
0.20 |
0.13 |
0.20 |
| Die Height |
in |
12.60 |
12.60 |
13.78 |
| Slide Adjustment |
in |
3.15 |
| Slide Area |
in |
25.59 x 20.47 |
| Shank Hole Dia |
in |
2 |
| Bolster Area |
in |
45.28 x 20.48 |
45.28 x 26.78 |
| Bolster Thickness |
in |
4.72 |
5.51 |
4.72 |
| Bolster Height |
in |
33.07 |
33.86 |
33.07 |
| Inner Dimension of frame |
in |
26.77 |
| Main Motor |
HPxP |
15 x 4 |
| Slide Adjust. Motor |
HPxP |
0.3 x 4 |
| Foot Size |
in |
43.70 x 65.94 |
43.70 x 68.31 |
| Anchor Bolts Position |
in |
40.94 x 61.22 |
40.94 x 63.58 |
| Req'd Floor Space |
in |
49.02 x 85.63 x 119.29 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
XL |
| Capacity |
US Tons |
176 |
| Stroke Length |
in |
5.12 |
3.15 |
7.87 |
9.84 |
| Stroke per Minute |
SPM |
40~85 |
55~115 |
25~50 |
20~45 |
| Tonnage Rating Point (BDC) |
in |
0.24 |
0.16 |
0.24 |
0.24 |
| Die Height |
in |
13.78 |
13.78 |
15.75 |
17.72 |
| Slide Adjustment |
in |
3.94 |
| Slide Area |
in |
27.56 x 22.83 |
| Shank Hole Dia |
in |
2.56 |
| Bolster Area |
in |
49.21 x 23.6 |
49.21 x 29.93 |
53.15 x 29.9 |
| Bolster Thickness |
in |
5.91 |
6.89 |
5.91 |
| Bolster Height |
in |
36.02 |
37.01 |
36.02 |
| Inner Dimension of frame |
in |
29.53 |
32.68 |
| Main Motor |
HPxP |
20 x 4 |
| Slide Adjust. Motor |
HPxP |
1 x 4 |
| Foot Size |
in |
50.39 x 70.28 |
50.39 x 77.56 |
53.54 x 85.83 |
| Anchor Bolts Position |
in |
46.46 x 64.37 |
46.46 x 71.65 |
| Req'd Floor Space |
in |
59.06 x 90.87 x 137.40 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| |
|
S |
H |
L |
XL |
| Capacity |
US Tons |
220 |
| Stroke Length |
in |
5.91 |
3.74 |
7.87 |
9.84 |
| Stroke per Minute |
SPM |
35~70 |
45~95 |
20~40 |
20~40 |
| Tonnage Rating Point (BDC) |
in |
0.24 |
0.12 |
0.24 |
0.24 |
| Die Height |
in |
16.14 |
16.14 |
17.72 |
17.72 |
| Slide Adjustment |
in |
4.33 |
| Slide Area |
in |
33.46 x 25.59 |
| Shank Hole Dia |
in |
2.56 |
| Bolster Area |
in |
55.12 x 26.78 |
55.12 x 32.3 |
59.0 x 32.3 |
| Bolster Thickness |
in |
6.69 |
7.78 |
6.69 |
| Bolster Height |
in |
40.16 |
41.26 |
40.16 |
| Inner Dimension of frame |
in |
33.46 |
33.86 |
| Main Motor |
HPxP |
25 x 4 |
| Slide Adjust. Motor |
HPxP |
1 x 4 |
| Foot Size |
in |
53.94 x 81.30 |
53.94 x 86.42 |
56.30 x 87.20 |
| Anchor Bolts Position |
in |
50.20 x 71.46 |
50.20 x 76.57 |
52.56 x 76.57 |
| Req'd Floor Space |
in |
62.20 x 97.05 x 149.80 |
| Accuracy |
JIC, JIS, CNS 1st |
| » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|
| | | S | H | L | XL | | Capacity | US Tons |
286 |
| Stroke Length | in | 7.09 | 3.94 | 9.84 | 11.81 | | Stroke per Minute | SPM | 30~60 | 40~75 | 20~40 | 20~35 | | Tonnage Rating Point (BDC) | in | 0.26 | 0.16 | 0.26 | 0.26 | | Die Height | in | 18.11 | 18.11 | 19.69 | 21.26 | | Slide Adjustment | in | 4.72 | | Slide Area | in | 37.40 x 27.56 | | Shank Hole Dia | in | 2.56 | | Bolster Area | in | 59.06 x 27.6 | 59.06 x 33.90 | 69.0 x 35.43 | | Bolster Thickness | in | 7.09 | 8.66 | 7.09 | | Bolster Height | in | 43.31 | 59.06 | 43.31 | | Inner Dimension of frame | in | 37.40 | 50.00 | | Main Motor | HPxP | 30 x 4 | | Slide Adjust. Motor | HPxP | 2 x 4 | | Foot Size | in | 60.43 x 88.19 | 60.43 x 94.49 | 64.96 x 100.39 | | Anchor Bolts Position | in | 57.48 x 74.80 | 57.48 x 78.74 | 66.93 x 78.74 | | Req'd Floor Space | in | 81.38 x 100.39 x 172.44 | | Accuracy | JIC, JIS, CNS 1st | | » Contact Stamtec for actual and wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions. |
|
|
|