PRESSING Fast Forward on NEW Installations

Stamtec Press Model: SE2-1320-244-72 Transfer Press

Stamtec recently completed installation of a NEW 1320 Ton Transfer Press.  During the installation, a TIME LAPSE VIDEO was completed to showcase the Stamtec SE2-1320-244-72 Transfer Press from delivery to start-up.

Video | Images | Specifications

Click on the link below to view the video. Enjoy!

If you are having trouble viewing our videos, please click on the following links:

YouTube | Vimeo

Stamtec Press Model SE2-1320-244-72 Installation Images

Click on the images below to enlarge.

Stamtec Press Model SE2-1320-244-72 Specifications

CAPACITY US Tons 1320
STROKE LENGTH IN. 24.02
SPEED SPM 10 ~ 25
TONNAGE RATING POINT IN. 0.52
DIE HEIGHT IN. 36.00
SLIDE ADJUSTMENT (Powered) IN. 10.08
SLIDE AREA (L-R X F-B) IN. 244 x 72
BOLSTER AREA IN. 244 x 72

Stamtec Transfer Presses are designed to run dies with very large dimensions, both left to right and front to back. It can run progressive or transfer dies, running large, odd-shaped or deep-formed parts that require a transfer system to move the parts through the die.

Stamtec will work with the transfer system provider of your choice (e.g., AP&T, Atlas, Gudel, HMS, Linear, Nobel, Wayne Trail) to integrate the transfer system completely with the press, feed line and other peripheral equipment as necessary.

Give us a call at 931-393-5050 to discuss your how Stamtec Metal Stamping & Forming Production Equipment can work for you.

Comments are closed.