Servo Press

Providing flexibility, productivity & profitability, with a virtually unlimited number of stroke & slide movement profiles

REQUEST A CUSTOM QUOTE

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

Mechanical, Forging, & Servo Presses for Your Complete Press-line Solution

IS1 Series Servo Driven Press


Stamtec iS1 Series - One-Point, Direct Drive, Gap Frame Servo Press
(Powered by Siemens)

With Stamtec’s Servo Motor Drive Technology, the standard electric motor, flywheel, and clutch/brake are replaced with a high-torque, low-rpm servo motor. Proprietary servo press controls specifically designed for the servo press to achieve a wide variety of stroke lengths and slide movement profiles, while supplying full working energy capacity even at low speeds. This allows the user to perform a wide variety of jobs in one press (e.g. drawing, re-strike, warm forming, etc.) and easily adapt to automation and feed applications. In addition, user-defined motion curves allow up to 20 various segments in a cycle curve, defined by slide position, speed, and pause duration parameters.

TONNAGE RANGE: 88 - 330
Delivery Time: some models in stock or with quick delivery

Review the specs below and then contact us for more information on our iS1 Series metal stamping presses.


Specs

iS1-80

MODEL iS1-80 SPECIFICATIONS
TypeDC
CapacityUS Tons8888
Metric Tons8080
Rated tonnage pointin.0.20.2
mm55
Stroke lengthin.7.097.09
mm180180
SpeedSPM~ 80~ 80
Die heightin.13.7813.78
mm350350
Slide area (L-R X F-B)in.27.56 x 18.1127.56 x 18.11
mm700 x 460700 x 460
Bolster area (L-R X F-B)in.35.43 x 23.6246.06 x 23.62
mm900 x 6001170 x 600
Bolster thicknessin.3.943.94
mm100100
Side frame opening (window)
(F-B x H)
in.25.59 x 18.11--
mm650 x 460--
Maximum die weightlbs.760.60760.60
Kgs345345
Slide adjustmentin.3.153.15
mm8080
Slide adjusting motorKw x p0.4 x 40.4 x 4
Working heightin.32.6832.68
mm830830
Air pressure requiredPSI7070
kg / cm255
Parallelism: Slide to Bolster - .001" per foot or less.  Standard voltage is 480. Other voltage available at additional cost.
Standard Paint Color- RAL-7035, Light Grey

Please contact Stamtec concerning components and standard and optional features of our iS1 Series servo driven press.