Stamtec four-point straight side presses are designed to run large dimension dies, both left to right and front to back. Our four-point straight side press can also run progressive or transfer dies, as well as large, odd-shaped or deep-formed parts that require a transfer system to move the through the die.
Put one of our high performance presses to work, and grow with us as
we grow with you.
Stamtec will work with the transfer system provider of your choice (e.g., HMS, Wayne Trail, Linear, Gudel, Atlas) to integrate the transfer system completely with the press, feed line and other peripheral equipment as necessary.
Low-inertia, high-torque, eccentric-geared drive system design featuring precision-cut, steel-rim eccentric gears; plunger guiding; and double-helical gearing for the drive shaft and intermediate gears—all lubricated by an enclosed oil bath and spray system.
Feature eccentric gear drives with plunger guides on each connection to control side thrust and deliver precision slide tracking throughout the stroke.
Stamtec is a division of Chin-Fong
U.S. | Taiwan | China
Sign-Up to receive email updates