The Stamtec SLX two-point straight side press with link motion drive technology is designed for stamping large parts or parts produced in long progressive dies that require deeper or more complex forming, at high single-stroking rates or in continuous mode, using either blanks or coil stock.
Stamtec’s link motion drive technology is standard on the SLX series. With link motion, the slide velocity decreases by up to 40 percent during the working portion of the stroke so the material flows more effectively while the non-working portion of the stroke increases by an offsetting amount to maintain high production rates. The results are better quality parts produced at higher production rates. In addition, the slower speed of the working stroke reduces die impact, punch penetration, snap-through, noise and vibration, thereby increasing machine and die life.
Tonnage Range: 176-550 Delivery Time: 20-24 weeks
Stamtec presses can customized to meet a wider range of SPM, stroke, rating point (BDC), bed and other specifications and dimensions.
Parallelism: Slide to Bolster - .001" per foot or less
Deflection: .0015" per foot or less R to L & F to B with 2/3 of the bed symmetrically loaded.
SLX 200
MODEL SLX-200 SPECIFICATIONS
Type
SLX-200
Capacity
US Tons
220
Metric ton
200
Stroke Length
Inch
5.9
mm
150
Speed
SPM
30~80
Tonnage Rating Point
Inch
0.157
mm
4
Die Height
Inch
17.72
mm
450
Maximum upper die weight
lbs
3306
kgs
1500
Slide Adjustment - Powered
Inch
3.15
mm
80
Slide Area (L-R X F-B)
Inch
74.81 x 29.53
mm
1,900 x 750
Bolster Area (L-R X F-B)
Inch
86.61 x 37.00
mm
2,200 x 940
Bolster Thickness
Inch
6.69
mm
170
Floor to top of bolster
Inch
39.67
mm
1000
Opening Through Side Frame (Window) (F-B x H)
Inch
35.43 x 11.81
mm
900 x 300
Overall Height (Approx)
Inch
153.54
Mm
3900
Weight (Approx)
Lbs
61,729
Metric Tons
27.9
Motor Horsepower: Main
HP X P
30 x 4
Parallelism: Slide to Bolster - .001" per foot or less
Deflection: .0015" per foot or less R to L & F to B with 2/3 of the bed symmetrically loaded.
SLX 250
MODEL SLX-250 SPECIFICATIONS
Type
SLX-250
Capacity
US Tons
275
Metric ton
250
Stroke Length
Inch
5.9
mm
150
Speed
SPM
30 ~ 70
Tonnage Rating Point
Inch
0.19
mm
5
Die Height
Inch
17.71
mm
450
Maximum upper die weight
lbs
4409
kgs
2000
Slide Adjustment - Powered
Inch
3.94
mm
100
Slide Area (L-R X F-B)
Inch
86.61 x 35.43
mm
2,200 x 900
Bolster Area (L-R X F-B)
Inch
98.42 x 39.37
mm
2,500 x 1,000
Bolster Thickness
Inch
7.08
mm
180
Floor to top of bolster
Inch
43.31
mm
1100
Opening Through Side Frame (Window) (F-B x H)
Inch
35.43 x 11.81
mm
900 x 300
Overall Height (Approx)
Inch
175.98
Mm
4470
Motor Horsepower: Main
HP x P
40 x 4
Parallelism: Slide to Bolster - .001" per foot or less
Deflection: .0015" per foot or less R to L & F to B with 2/3 of the bed symmetrically loaded.
SLX 300
MODEL SLX-300 SPECIFICATIONS
Type
SLX-300
Capacity
US Tons
330
Metric ton
300
Stroke Length
Inch
5.91
mm
150
Speed
SPM
30 ~ 60
Tonnage Rating Point
Inch
0.196
mm
5
Die Height
Inch
17.72
mm
450
Maximum upper die weight
lbs
4,409
kgs
2000
Slide Adjustment - Powered
Inch
3.94
mm
100
Slide Area (L-R X F-B)
Inch
86.61 x 35.43
mm
2,200 x 900
Bolster Area (L-R X F-B)
Inch
98.42 x 39.37
mm
2,500 x 1,000
Bolster Thickness
Inch
7.87
mm
200
Floor to top of bolster
Inch
47.24
mm
1200
Opening Through Side Frame (Window)
Inch
35.43
mm
900
Overall Height (Approx)
Inch
179.9
mm
4570
Motor Horsepower: Main
HP x P
50 x 4
Parallelism: Slide to Bolster - .001" per foot or less
Deflection: .0015" per foot or less R to L & F to B with 2/3 of the bed symmetrically loaded.
Press Advantages:
Press Advantages - 2-Point Straight Side Press (SLX Series)
Fast-response hydraulic overload relieves the pressure of a tonnage overload in milliseconds, stopping the press immediately and protecting press and dies from damage.
Standard hydraulic overload protection also compensates for unequal loading across the slide by applying full pressure where required to help maintain parallelism.
Slower speed of the working stroke reduces die impact, punch penetration, snap-through, noise and vibration, thereby increasing machine and die life.
Standard link motion drive technology facilitates production of a better quality part produced at higher production rates.
Optional Features:
Optional Features - 2-Point Straight Side Press (SLX Series)
Press controls from industry leaders like Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, etc.
Anti-vibration press leveling mounts
Safety light curtains
Tonnage monitor
Quick die-change system
Die cushion
Knockout bar
Compact servo feed line
Standard Features:
2-Point Straight Side Press (SLX Series)
Link motion drive technology
Wet clutch and brake
Flywheel brake
Hydraulic overload system
Air counterbalance system
Automatic lubrication system
Digital die height indicator
Removable, flanged, T-slotted slide plate and bolster
Motorized slide adjustment
Press control with:
Six programmable limit switches
Four programmable die monitor inputs
Six-digit part and batch counters
LCD display screen for status and fault messages
LED display for crank angle and spm
Interlocked die safety block
Press Components:
Press Components - 2-Point Straight Side Press (SLX Series)
1. Slide 2. Adjusting screw 3. Front timing gear 4. Crankshaft bearing (front) 5. Connecting rod 6. Crankshaft 7. Main gear (rear drive) 8. Link 9. Lever 10. Flywheel 11. Wet clutch and brake 12. Pinion gear
