Select a Model:

HSD 60

MODEL HSD-60 SPECIFICATIONS
Capacity US Tons 66
Metric ton 60
Tonnage Rating Point Inch 0.125
mm 3.2
Stroke Length Inch 1.18
mm 30
Strokes Per Minute SPM 200~550
Die Height (S.D.A.U) Inch 13.39
mm 340
Slide Adjustment Inch 1.97
mm 50
Bolster Area (L-R X F-B) Inch 33.46 x 23.62
mm 850 x 600
Slide Area (L-R X F-B) Inch 31.10 x 17.71
mm 790 x 450
Bed Opening (L-R x F-B) Inch 27.56 x 7.87
mm 700 x 200
Side Opening (LR x H) Inch 11.81 x 11.81
mm 300 x 300
Floor to top of bolster (Approx) Inch 35.43
mm 900
Overall Dimensions (Approx.) (L-R-F-B) Inch 72.05 x 49.21
mm 1,830 x 1,250
Overall Height (Approx.) Inch 117.91
mm 2,995
Main Motor   VS 20
Air Pressure required PSI 71
kg/cm2 5
Knockout Bar on Centerline of Slide, Left to Right
Bolster Machining-Standard (Refer to HSD Series Catalog)
Slide Plate Machining-Standard (Refer to HSD Series Catalog)

HSD 80

MODEL HSD-80 SPECIFICATIONS
Capacity US Tons 88
Metric ton 80
Stroke Length Inch 1.18
mm 30
Speed SPM 200~550
Tonnage Rating Point Inch 0.125
mm 3.2
Die Height Inch 14.17
mm 360
Slide Adjustment - Powered Inch 1.97
mm 50
Slide Area (L-R X F-B) Inch 39.37 x 19.68
mm 1,000 x 500
Bolster Area (L-R X F-B) Inch 43.31 x 27.56
mm 1,100 x 700
Slide Area (L-R X F-B) Inch 39.36 x 19.68
mm 1,000 x 500
Bed Opening (L-R x F-B) Inch 35.43 x 7.87
mm 900 x 200
Side Opening (LR x H) Inch 13.78 x 13.78
mm 350 x 350
Floor to top of bolster (Approx.) Inch 37.4
mm 950
Overall Dimensions (Approx.) (L-R-F-B) Inch 84.25 x 53.15
mm 2,140 x 1,350
Overall Height (Approx) Inch 129.29
mm 3,284
Main Motor   VS 30
Air Pressure required PSI 71
kg/cm2 5
Knockout Bar on Centerline of Slide, Left to Right
Bolster Machining-Standard (Refer to HSD Series Catalog)
Slide Plate Machining-Standard (Refer to HSD Series Catalog)
     

HSD 125

MODEL HSD-125 SPECIFICATIONS
Capacity US Tons 137
Metric ton 125
Stroke Length Inch 1.18
mm 30
Speed SPM 200~500
Tonnage Rating Point Inch 0.125
mm 3.2
Die Height Inch 14.96
mm 380
Slide Adjustment-Powered Inch 1.97
mm 50
Slide Area (L-R X F-B) Inch 47.24 x 23.62
mm 1,200 x 600
Bolster Area (L-R X F-B) Inch 51.18 x 31.50
mm 1,300 x 800
Slide Area (L-R X F-B) Inch 47.24 x 23.62
mm 1,200 x 600
Bed Opening (L-R x F-b) Inch 43.30 x 8.27
mm 1,100 x 210
Side Opening (LR x H) Inch 15.75 x 15.75
mm 400 x 400
Floor to top of bolster (Approx.) Inch 39.84
mm 1,012
Overall Dimensions (Approx.) (L-R-F-B) Inch 94.09 x 59.05
mm 2,390 x 1,500
Overall Height (Approx.) Inch 147
mm 3,742
Main Motor   VS 40
Air Pressure required PSI 71
kg/cm2 5
Knockout Bar on Centerline of Slide, Left to Right
Bolster Machining-Standard (Refer to HSD Series Catalog)
Slide Plate Machining-Standard (Refer to HSD Series Catalog)

HSD 200

MODEL HSD-200 SPECIFICATIONS
Capacity US Tons 220
Metric ton 200
Stroke Length Inch 1.18
mm 30
Speed SPM 150~350
Tonnage Rating Point Inch 0.125
mm 3.2
Die Height Inch  15.74
mm 400
Slide Adjustment-Powered Inch 2.36
mm 60
Slide Area (L-R X F-B) Inch 66.92 x 27.56
mm 1,700 x 700
Bolster Area (L-R X F-B) Inch 70.86 x 35.43
mm 1,800 x 900
Slide Area (L-R X F-B) Inch 47.24 x 27.56
mm 1,200 x 700
Bed Opening (L-R x F-b) Inch 60.43 x 13.78
mm 1,535 x 350
Side Opening (LR x H) Inch 17.72 x 17.72
mm 450 x 450
Floor to top of bolster (Approx.) Inch 53.94
mm 1,370
Overall Dimensions (Approx.) (L-R-F-B) Inch 125.59 x 78.74
mm 3,190 x 2,000
Overall Height (Approx.) Inch 175.98
mm 4,470
Main Motor   VS 50
Air Pressure required PSI 71
kg/cm2 5
Knockout Bar on Centerline of Slide, Left to Right
Bolster Machining-Standard (Refer to HSD Series Catalog)
Slide Plate Machining-Standard (Refer to HSD Series Catalog)

HSD 300

MODEL HSD-300 SPECIFICATIONS
Capacity US Tons 330
Metric ton 300
Stroke Length Inch 1.18
mm 30
Speed SPM 100~300
Tonnage Rating Point Inch 0.125
mm 3.2
Die Height Inch 16.54
mm 420
Slide Adjustment-Powered Inch 2.76
mm 70
Slide Area (L-R X F-B) Inch 78.74 x 35.43
mm 2,000 x 900
Bolster Area (L-R X F-B) Inch 78.74 x 39.36
mm 2,000 x 1,000
Slide Area (L-R X F-B) Inch 78.74 x 35.43
mm 2,000 x 900
Bed Opening (L-R x F-b) Inch 59.05 x 13.78
mm 1,500 x 350
Side Opening (LR x H) Inch 17.72 x 17.72
mm 450 x 450
Floor to top of bolster (Approx) Inch 61.02
mm 1,550
Overall Dimensions (Approx.) (L-R-F-B) Inch 127.95 x 98.42
mm 3,250 x 2,500
Overall Height (Approx.) Inch 224.4
mm 5,700
Main Motor   VS 60
Air Pressure required PSI 71
kg/cm2 5
Knockout Bar on Centerline of Slide, Left to Right    
Bolster Machining-Standard (Refer to HSD Series Catalog)    
Slide Plate Machining-Standard (Refer to HSD Series Catalog)    

Press Advantages:

Press Advantages - 2-Point Straight Side Press (HSD Series)

HSD diagram - 2 point straight side press - stamtecStandard dynamic balancing device counterbalances the eccentric thrust generated from the crankshaft rotation and slide movement, ensuring reduced frame vibration, better stampings and longer die life.

Standard hydraulic slide adjustment locking device eliminates clearances in the slide adjustment mechanism, reducing the effects of snap-through and assuring consistent bottom dead-center accuracy.

HSD Plunger - Stamtec mechanical pressesPlunger guides maintain the plunger and guide clearance, compensating for differences in expansion rates between crown and slide and resisting the front to back load created by crankshaft rotation.

 

 

Optional Features:

2-Point Straight Side Press (HSD Series)

  • Press controls from industry leaders like Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, etc.
  • Anti-vibration press leveling mounts 
  • Safety light curtains
  • Tonnage monitor
  • Quick die-change system
  • Die cushion
  • Compact servo feed line

Standard Features:

2-Point Straight Side Press (HSD Series)

  • Wet clutch and brake
  • Flywheel brake
  • Hydraulic overload system
  • Air counterbalance system
  • Automatic lubrication system
  • Digital die height indicator
  • Knockout bar
  • Removable, flanged, T-slotted slide plate and bolster
  • Motorized slide adjustment (on presses over 80 tons)
  • Press control with:
    • Six programmable limit switches
    • Four programmable die monitor inputs
    • Six-digit part and batch counters
    • LCD display screen for status and fault messages
    • LED display for crank angle and spm
    • Interlocked die safety block

Press Components:

Please contact Stamtec for more details.