Select a Model:

OCP-25

MODEL OCP-25 SPECIFICATIONS
Type   S H L
Capacity US Tons 27.55 27.55 27.55
Metric ton 25 25 25
Tonnage Rating Point Inch 0.13 0.06 0.13
mm 3.2 1.6 3.2
Stroke Length Inch 2.76 1.57 3.94
mm 70 40 100
Strokes Per Minute
SPM 75 ~ 140 95 ~ 180 55 ~ 100
Die Height Inch 9.65 9.65 9.06
mm 245 245 230
Slide Adjustment
Inch 1.97 1.97 1.97
mm 50 50 50
Bolster Area (L-R X F-B) Inch 28.35 x 12.60 28.35 x 12.60 35.43 x 12.60
mm 720 x 320 720 x 320 720 x 320
Bolster Thickness Inch 2.76 3.35 2.76
mm 70 85 70
Slide Area (L-R X F-B) Inch 13.78 x 11.81 13.78 x 11.81 13.78 x 11.81
mm 350 x 300 350 x 300 350 x 300
Main Motor (VS) HP 5 5 5
Slide Adj. Motor HP Manual Manual Manual
Die Cushion - - - -
Capacity US Tons - - -
Pad Area (LR x FB) Inch - - -
mm - - -
Stroke Inch - - -
mm - - -
Machine Dimension - - - -
Width (LR) Inch 35.43 35.43 35.43
mm 900 900 900
Depth (FB) Inch 40.35 40.35 40.35
mm 1,025 1,025 1,025
Height (H) Inch 73.62 73.62 73.62
mm 1,870 1,870 1,870

OCP-35

MODEL OCP-35 SPECIFICATIONS
Type   S H L
Capacity US Tons 38.58 38.58 38.58
Metric ton 35 35 35
Tonnage Rating Point Inch 0.13 0.06 0.13
mm 3.2 1.6 3.2
Stroke Length Inch 3.15 1.77 4.33
mm 80 45 110
Strokes Per Minute
SPM 70 ~ 135 90 ~ 180 50 ~ 95
Die Height Inch 9.84 9.84 9.84
mm 250 250 250
Slide Adjustment
Inch 2.17
2.17 2.17
mm 55 55 55
Bolster Area (L-R X F-B) Inch 30.71 x 13.40
30.71 x 13.40 30.71 x 13.40
mm 780 x 340 780 x 340 780 x 340
Bolster Thickness Inch 2.76 3.34 2.76
mm 70 85 70
Slide Area (L-R X F-B) Inch 14.96 x 12.60 14.96 x 12.60 14.96 x 12.60
mm 380 x 320 380 x 320 380 x 320
Main Motor (VS) HP 5 5 5
Slide Adj. Motor HP Manual Manual Manual
Die Cushion - - - -
Capacity US Tons - - 2.9
Pad Area (LR x FB) Inch - - 11.81 x 9.06
mm - - 300 x 230
Stroke Inch - - 1.97
mm - - 50
Machine Dimension - - - -
Width (LR) Inch 33.61 33.61 33.61
mm 930 930 930
Depth (FB) Inch 47.24 47.24 47.24
mm 1,200 1,200 1,200
Height (H) Inch 82.68 82.68 82.68
mm 2,100 2,100 2,100

OCP-45

MODEL OCP-45 SPECIFICATIONS
Type   S H L
Capacity US Tons 50 50 50
Metric ton 45 45 45
Tonnage Rating Point Inch 0.13 0.09 0.13
mm 3.2 2.3 3.2
Stroke Length Inch 3.15 1.97 4.72
mm 80 50 120
Strokes Per Minute
SPM 65 ~ 130 85 ~ 175 50 ~ 95
Die Height Inch 9.84 9.84 10.63
mm 250 250 270
Slide Adjustment
Inch 2.36
2.36 2.36
mm 60 60 60
Bolster Area (L-R X F-B) Inch 33.50 x 14.18
33.50 x 14.18 33.5 x 17.3
mm 850 x 360
850 x 360 850 x 440
Bolster Thickness Inch 3.54 4.13 3.54
mm 90 105 90
Slide Area (L-R X F-B) Inch 16.93 x 13.78
16.93 x 13.78 16.93 x 13.78
mm 430 x 350
430 x 350 430 x 350
Main Motor (VS) HP 7.5 7.5 7.5
Slide Adj. Motor HP 0.2 0.2 0.2
Die Cushion - - - -
Capacity US Tons - - 2.9
Pad Area (LR x FB) Inch - - 13.91 x 9.06
mm - - 335 x 230
Stroke Inch - - 2.36
mm - - 50
Machine Dimension - - - -
Width (LR) Inch 41.33 41.33 41.33
mm 1,055 1,055 1,055
Depth (FB) Inch 66.34 66.34 67.91
mm 1,685 1,685 1,725
Height (H) Inch 90.75 90.75 93.11
mm 2,305 2,305 2,365

OCP-60

MODEL OCP-60 SPECIFICATIONS
Type   S H L
Capacity US Tons 66 66 66
Metric ton 60 60 60
Tonnage Rating Point Inch 0.16 0.09 0.16
mm 4 2.3 4
Stroke Length Inch 3.54 2.17 5.51
mm 90 55 140
Strokes Per Minute
SPM 60 ~ 120 80 ~ 165 40 ~ 85
Die Height Inch 10.63 10.63 11.81
mm 270 270 300
Slide Adjustment
Inch 2.76
2.76 2.76
mm 70 70 70
Bolster Area (L-R X F-B) Inch 35.44 x 15.75
35.44 x 15.75 35.44 x 20.48
mm 900 x 400
900 x 400 900 x 520
Bolster Thickness Inch 3.54 4.13 3.54
mm 90 105 90
Slide Area (L-R X F-B) Inch 19.68 x 15.75
19.68 x 15.75 19.68 x 15.75
mm 500 x 400
500 x 400 500 x 400
Main Motor (VS) HP 7.5 7.5 7.5
Slide Adj. Motor HP 0.3 0.3 0.3
Die Cushion - - - -
Capacity US Tons - - 4
Pad Area (LR x FB) Inch - - 13.78 x 9.25
mm - - 350 x 235
Stroke Inch - - 2.76
mm - - 70
Machine Dimension - - - -
Width (LR) Inch 40.16 40.16 40.16
mm 1,020 1,020 1,020
Depth (FB) Inch 69.09
69.09 69.09
mm 1,755 1,755 1,755
Height (H) Inch 98.23 98.23 101.38
mm 2,495 2,495 2,575

OCP-80

MODEL OCP-80 SPECIFICATIONS
Type   S H L
Capacity US Tons 88 88 88
Metric ton 80 80 80
Tonnage Rating Point Inch 0.20 0.13 0.20
mm 5
3.2 5
Stroke Length Inch 3.94 2.36 6.30
mm 100 60 160
Strokes Per Minute
SPM 55 ~ 110 75 ~ 150 40 ~ 75
Die Height Inch 11.81 11.81 12.99
mm 300 300 330
Slide Adjustment
Inch 3.15
3.15 3.15
mm 80 80 80
Bolster Area (L-R X F-B) Inch 39.38 x 18.11
39.38 x 18.11 39.38 x 23.6
mm 1,000 x 460
1,000 x 460 1,000 x 600
Bolster Thickness Inch 3.94 4.72 3.94
mm 100 120 100
Slide Area (L-R X F-B) Inch 22.10 x 18.11
22.10 x 18.11 22.10 x 18.11
mm 560 x 460
560 x 460 560 x 460
Main Motor (VS) HP 10 10 10
Slide Adj. Motor HP 0.3 0.3 0.3
Die Cushion - - - -
Capacity US Tons - - 6.9
Pad Area (LR x FB) Inch - - 16.14 x 10.24
mm - - 410 x 260
Stroke Inch - - 2.76
mm - - 70
Machine Dimension - - - -
Width (LR) Inch 43.82 43.82 43.82
mm 1,113 1,113 1,113
Depth (FB) Inch 71.65
71.65 74.41
mm 1,820 1,820 1,890
Height (H) Inch 108.82 108.82 112.36
mm 2,764 2,764 2,854

OCP-110

MODEL OCP-110 SPECIFICATIONS
Type   S H L
Capacity US Tons 121 121 121
Metric ton 110 110 110
Tonnage Rating Point Inch 0.20 0.13 0.20
mm 5
3.2 5
Stroke Length Inch 4.33 2.76 7.09
mm 110 70 180
Strokes Per Minute
SPM 50 ~ 100 65 ~ 135 30 ~ 65
Die Height Inch 12.60 12.60 13.78
mm 320 320 350
Slide Adjustment
Inch 3.54
3.54 3.54
mm 90 90 90
Bolster Area (L-R X F-B) Inch 45.28 x 20.48
45.28 x 20.48 45.28 x 26.78
mm 1,150 x 520
1,150 x 520 1,150 x 680
Bolster Thickness Inch 4.72 5.51 4.72
mm 120 140 120
Slide Area (L-R X F-B) Inch 25.59 x 20.47
25.59 x 20.47 25.59 x 20.47
mm 650 x 520
650 x 520 650 x 520
Main Motor (VS) HP 15 15 15
Slide Adj. Motor HP 0.3 0.3 0.3
Die Cushion - - - -
Capacity US Tons - - 8.8
Pad Area (LR x FB) Inch - - 19.69 x 11.81
mm - - 500 x 300
Stroke Inch - - 3.15
mm - - 80
Machine Dimension - - - -
Width (LR) Inch 49.02 49.02 49.02
mm 1,245 1,245 1,245
Depth (FB) Inch 80.51
80.51 85.63
mm 2,045 2,045 2,175
Height (H) Inch 115.35 115.35 119.29
mm 2,930 2,930 3,030

OCP-160

MODEL OCP-160 SPECIFICATIONS
Type   S H L XL
Capacity US Tons 176 176 176 176
Metric ton 160 160 160 160
Tonnage Rating Point Inch 0.24 0.16 0.24 0.24
mm 6 4 6 6
Stroke Length Inch 5.12 3.15 7.87 9.84
mm 130 80 200 250
Strokes Per Minute
SPM 40 ~ 85 55 ~ 115 25 ~ 50 20 ~ 45
Die Height Inch 13.78 13.78 15.75 17.72
mm 350 350 400 450
Slide Adjustment
Inch 3.94
3.94 3.94 3.94
mm 100 100 100 100
Bolster Area (L-R X F-B) Inch 49.20 x 23.60
49.20 x 23.60 49.20 x 29.93
53.15 x 29.90
mm 1,250 x 600
1,250 x 600 1,250 x 760
1,350 x 760
Bolster Thickness Inch 5.91 6.89 5.91 5.91
mm 150 175 150 150
Slide Area (L-R X F-B) Inch 27.56 x 22.83
27.56 x 22.83 27.56 x 22.83 27.56 x 22.83
mm 700 x 580
700 x 580 700 x 580 700 x 580
Main Motor (VS) HP 15 15 15 15
Slide Adj. Motor HP 0.6 0.6 0.6 0.6
Die Cushion - - - - -
Capacity US Tons - - 11 11
Pad Area (LR x FB) Inch - - 21.26 x 13.78
21.26 x 13.78
mm - - 540 x 350
540 x 350
Stroke Inch - - 3.15 3.15
mm - - 80 80
Machine Dimension - - - - -
Width (LR) Inch 55.91 55.91 55.91 59.06
mm 1,420 1,420 1,420 1,500
Depth (FB) Inch 85.83
85.83 90.87 90.87
mm 2,180 2,180 2,308 2,308
Height (H) Inch 128.74 128.74 133.46 137.40
mm 3,270 3,270 3,390 3,490

OCP-200

MODEL OCP-200 SPECIFICATIONS
Type   S H L XL
Capacity US Tons 220 220 220 220
Metric ton 200 200 200 200
Tonnage Rating Point Inch 0.24 0.16 0.24 0.24
mm 6 4 6 6
Stroke Length Inch 5.91 3.74 7.87 9.84
mm 150 95 200 250
Strokes Per Minute
SPM 35 ~ 70 45 ~ 95 20 ~ 45 20 ~ 40
Die Height Inch 16.14 16.14 17.72 17.72
mm 410 410 450 450
Slide Adjustment
Inch 4.33
4.33 4.33 4.33
mm 110 110 110 110
Bolster Area (L-R X F-B) Inch 55.12 x 26.78
55.12 x 26.78 55.12 x 32.30 59.00 x 32.30
mm 1,400 x 680
1,400 x 680 1,400 x 820
1,500 x 820
Bolster Thickness Inch 6.29 7.38 6.29 6.29
mm 160 187.50 160 160
Slide Area (L-R X F-B) Inch 33.46 x 25.59
33.46 x 25.59 33.46 x 25.59 33.46 x 25.59
mm 850 x 650
850 x 650 850 x 650 850 x 650
Main Motor (VS) HP 20 20 20 20
Slide Adj. Motor HP 1 1 1 1
Die Cushion - - - - -
Capacity US Tons - - 15 15
Pad Area (LR x FB) Inch - - 25.20 x 18.50
25.20 x 18.50
mm - - 640 x 470
640 x 470
Stroke Inch - - 3.94 3.94
mm - - 100 100
Machine Dimension - - - - -
Width (LR) Inch 59.84 59.84 59.84 62.20
mm 1,520 1,520 1,520 1,580
Depth (FB) Inch 94.69
94.69 97.05 97.05
mm 2,405 2,405 2,465 2,465
Height (H) Inch 144.29
144.29 147.83 149.80
mm 3,665 3,665 3,755 3,805

OCP-300

MODEL OCP-300 SPECIFICATIONS
Type   S H L XL
Capacity US Tons 330 330 330 330
Metric ton 300 300 300 300


Additional OCP-300 Specifications AVAILABLE ON REQUEST

OCP-260

MODEL OCP-260 SPECIFICATIONS
Type   S H L XL
Capacity US Tons 286 286 286 286
Metric ton 260 260 260 260
Tonnage Rating Point Inch 0.26 0.16 0.26 0.26
mm 6.5 4 6.5 6.5
Stroke Length Inch 7.09 3.94 9.84 11.81
mm 180 100 250 300
Strokes Per Minute
SPM 30 ~ 60 40 ~ 75 20 ~ 40 20 ~ 35
Die Height Inch 18.11 18.11 19.69 21.26
mm 460 460 500 540
Slide Adjustment
Inch 4.72
4.72 4.72 4.72
mm 120 120 120 120
Bolster Area (L-R X F-B) Inch 59.00 x 27.60
59.00 x 27.60 59.00 x 35.43
69.00 x 35.43
mm 1,500 x 700
1,500 x 700 1,500 x 900 1,750 x 900
Bolster Thickness Inch 7.09 8.66 7.09 7.09
mm 180 220 180 180
Slide Area (L-R X F-B) Inch 36.22 x 27.56
36.22 x 27.56 36.22 x 27.56 36.22 x 27.56
mm 920 x 700
920 x 700 920 x 700 920 x 700
Main Motor (VS) HP 25 25 25 25
Slide Adj. Motor HP 2 2 2 2
Die Cushion - - - - -
Capacity US Tons - - 15 15
Pad Area (LR x FB) Inch - - 27.56 x 18.50
27.56 x 18.50
mm - - 700 x 470
700 x 470
Stroke Inch - - 3.94 3.94
mm - - 100 100
Machine Dimension - - - - -
Width (LR) Inch 69.57 69.57 69.57 81.38
mm 1,767 1,767 1,767 2,067
Depth (FB) Inch 88.19
88.19 94.49 100.39
mm 2,240 2,240 2,400 2,550
Height (H) Inch 163.39
163.39 168.90 172.44
mm 4,150 4,150 4,290 4,380

Press Advantages:

1-Point Gap Frame Presses (OCP Series)

OCP Gibbing - Stamtec mechanical pressesHeavy, one-piece welded steel frame is fully stress relieved and designed to resist deflection, providing more accurate stampings and longer die life. 

Fast-response hydraulic overload relieves the pressure of a tonnage overload in milliseconds, stopping the press immediately and protecting press and dies from damage.

Extra-long gibs provide excellent control of slide alignment and accuracy throughout the entire stroke.


Slide comes equipped with a removable, steel, T-slotted die-mounting plate for easy modification, repair or replacement.

Wet clutch and brake provide long life, very low maintenance, and high performance even at high single-stroking rates.

At no additional cost, our press control comes with features that are often optional on standard press controls:

• Six programmable limit switches
• Four programmable die protection inputs
• LCD display screen for status and fault messages
• LED display for crank angle and spm

Optional Features:

1-Point Gap Frame Presses (OCP Series)

Standard Features:

1-Point Gap Frame Presses (OCP Series)

  • Wet clutch and brake
  • Flywheel brake
  • Hydraulic overload system
  • Air counterbalance system
  • Automatic lubrication system
  • Digital die height indicator
  • Knockout bar
  • Removable, flanged, T-slotted slide plate and bolster
  • Motorized slide adjustment (on presses over 35 tons)
  • Press control with:
    • Programmable limit switches
    • Programmable die monitor inputs
    • Six-digit part and batch counters
    • Interlocked die safety block

Press Components:

1-Point Gap Frame Presses (OCP Series)

OCP gap frame press diagram
  1. Press frame
  2. Flywheel
  3. Wet clutch and brake
  4. Pinion drive shaft
  5. Main gear
  6. Counterbalance
  7. Crankshaft
  8. Adjusting screw
  9. Hydraulic overload
  10. Slide
  11. Slide knockout
  12. Slide plate (detachable)
  13. Bolster